Buick Encore: Vehicle Checks / Park Brake and P (Park) Mechanism Check

Buick Encore 2020-2025 Owner's Manual / Vehicle Care / Vehicle Checks / Park Brake and P (Park) Mechanism Check

Warning

When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move.

Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake.

To check the parking brake's holding ability: With the engine running and the transmission in N (Neutral), slowly remove foot pressure from the regular brake pedal. Do this until the vehicle is held by the parking brake only.
To check the P (Park) mechanism's holding ability: With the engine running, shift to P (Park). Then release the parking brake followed by the regular brake.

Contact your dealer if service is required.

Automatic Transmission Shift Lock Control Function Check

Warning When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. Before starting this check, be sure there is enough room around the vehicle...

Wiper Blade Replacement

Windshield wiper blades should be replaced periodically. See Maintenance Schedule. Replacement blades come in different types and are removed in different ways...

Other information:

Buick Encore 2020-2025 Owner's Manual: Introduction

About Driving the Vehicle As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control or a crash. Be sure to read the driving guidelines in this manual in the section called “Driving and Operating” and specifically Driver Behavior, Driving Environment, and Vehicle Design...

Buick Encore 2020-2025 Owner's Manual: Switching to Handset or Handsfree Mode

To switch between handset or handsfree mode, touch Phone on the Home Page to display “Call View.” While the active call is hands-free, touch the Handset option to switch to the handset mode. The Handset option changes to Handsfree once the Bluetooth device confirms it is operating as handset...