Buick Encore: Airbag System / If the On Indicator Is Lit for a Child Restraint
If a child restraint has been installed and
the ON indicator is lit:
- Turn the vehicle off.
- Remove the child restraint from the
vehicle.
- Remove any additional items from the
seat such as blankets, cushions, seat
covers, seat heaters, or seat massagers.
- Reinstall the child restraint following the
directions provided by the child restraint
manufacturer and refer to Securing Child
Restraints (With the Seat Belt in the Rear
Seat) or
Securing Child Restraints (With the Seat
Belt in the Front Seat).
- If, after reinstalling the child restraint
and restarting the vehicle, the ON
indicator is still lit, turn the vehicle off.
Then slightly recline the vehicle seatback
and adjust the seat cushion, if adjustable, to make sure that the
vehicle seatback is not pushing the child
restraint into the seat cushion. Also
make sure the child restraint is not
trapped under the vehicle head restraint.
If this happens, adjust the head restraint.
See Head Restraints.
- Restart the vehicle.
If the ON indicator is still lit, secure the child
in the child restraint in a rear seat position
in the vehicle, and check with your dealer.
The vehicle has a passenger sensing system
for the front outboard passenger position.
The passenger airbag status indicator will
light on the instrument panel when the
vehicle is started...
If a person of adult size is sitting in the
front outboard passenger seat, but the OFF
indicator is lit, it could be because that
person is not sitting properly in the seat...
Other information:
Music may be played from a paired
Bluetooth device. See Bluetooth (Overview
for 7 Inch Screen) or
Bluetooth (Pairing and Using a Phone for 7
Inch Screen) for help pairing a device.
Volume and song selection may be
controlled by using the infotainment
controls or the mobile device...
To switch between handset or handsfree
mode, touch Phone on the Home Page to
display “Call View.”
While the active call is hands-free, touch
the Handset option to switch to the
handset mode. The Handset option
changes to Handsfree once the Bluetooth
device confirms it is operating as handset...