Buick Encore: DIC Menu Items / Oil Life

Buick Encore 2020-2024 Owner's Manual / Instruments and Controls / Information Displays / DIC Menu Items / Oil Life

This display shows an estimate of the oil's remaining useful life. If OIL LIFE 99% REMAINING is displayed, that means 99% of the current oil life remains.

When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. See Engine Oil. In addition to the Engine Oil Life System monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Maintenance Schedule for more information.

Remember, the Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the Engine Oil Life System, press SET/CLR while the Remaining Oil Life display is active. See Engine Oil Life System.

Digital Speedometer

The speedometer shows how fast the vehicle is moving in either kilometers per hour (km/h) or miles per hour (mph). The speedometer cannot be reset. Trip A or Trip B, Average Fuel Economy Displays the current distance traveled, in either kilometers (km) or miles (mi), from the last reset for the trip odometer...

Tire Pressure

The display will show a vehicle with the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or pounds per square inch (psi)...

Other information:

Buick Encore 2020-2024 Owner's Manual: DIC Operation and Displays

The DIC has different displays which can be accessed by using the DIC buttons on the turn signal lever. The DIC displays trip, fuel, and vehicle system information, and warning messages if a system problem is detected. The bottom of the DIC display shows the position of the shift lever and the odometer...

Buick Encore 2020-2024 Owner's Manual: License Plate Lamp

To replace one of these bulbs: Push the left end of the lamp assembly toward the right. Turn the lamp assembly down to remove it. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). Pull the bulb (2) straight out of the bulb socket (1)...