Buick Encore: Exterior Lighting / Headlamp High/Low-Beam Changer

: Push the turn signal lever
away from
you and release, to turn the high beams on.
To return to low beams, push the lever
again or pull it toward you and release.

This indicator light turns on in the
instrument cluster when the high-beam
headlamps are on.
The exterior lamp control is on the
instrument panel to the left of the steering
column.
There are four positions:
: Turns the exterior lamps off
and
deactivates the AUTO mode...
Flash-to-Pass
To flash the high beams, pull the turn signal
lever all the way toward you. Then
release it.
Daytime Running Lamps (DRL)
Daytime Running Lamps can make it easier
for others to see the front of your vehicle
during the day...
Other information:
This light is part of the vehicle’s emission
control on-board diagnostic system. If this
light is on while the engine is running, a
malfunction has been detected and the
vehicle may require service. The light should
come on to show that it is working when
the ignition is in Service Mode...
Seat Belt Extender
If the vehicle's seat belt will fasten around
you, you should use it.
But if a seat belt is not long enough, your
dealer will order you an extender. When
you go in to order it, take the heaviest coat
you will wear, so the extender will be long
enough for you...
Categories
All seating positions in the vehicle have a
lap-shoulder belt.
The following instructions explain how to
wear a lap-shoulder belt properly.
Adjust the seat, if the seat is adjustable,
so you can sit up straight. To see how,
see “Seats” in the Index.

Pick up the latch plate and pull the belt
across you. Do not let it get twisted.
read more